Bernina 730 Instruction Manual Page 185

  • Download
  • Add to my manuals
  • Print
  • Page
    / 285
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 184
183Sewing and Sewing Computer Support – Balance
Balance
All stitches are checked and fully adjusted before the sewing computer leaves the factory.
Different fabrics, threads, stabilizers and interfacings can affect programmed stitches so that they are not
sewn out properly.
These effects can be corrected with the electronic Balance so that the stitch formation can be adjusted
where necessary to suit the fabric.
Balance for Practical and Decorative Stitches 9mm
When sewing soft fabrics such as jersey or tricot, the fabric tends to stretch under the presser foot which
also stretches the stitch being sewn. For example, the Honeycomb stitch opens up and is too long.
Thicker fabrics might cause the stitch to overlap, making it too short. Correcting with the Balance is very
easy.
Opening Balance
touch the function «Balance»
Balance Screen
the special Balance screen opens
in the left portion of the screen the stitch is displayed in its
original form
in the right portion of the screen the alterations made are
directly visible
the corrections can be made while sewing (with opened
screen)
Corrections
the stitch sewn on the fabric (e.g. the Honeycomb stitch)
opens up and it does not look correct:
turn the stitch length knob (displayed by a blue symbol on the
screen) until the stitch in the right portion of the screen is
identical with the stitch on the fabric
Saving and Closing Screen
touch «OK»
the corrections will be saved and the Balance screen will close
Deleting Corrections
touch «Reset»
the corrections of the selected
stitches will be deleted
Closing Screen
touch «ESC»
the Balance screen closes; returns to previous screen
032131.70.04_0509_a730_EN
Page view 184
1 2 ... 180 181 182 183 184 185 186 187 188 189 190 ... 284 285

Comments to this Manuals

No comments