Bernina 730 Instruction Manual download pdf (Page 152)

150 Quilt Stitches – Applications

Preparation

Securing Function (only Mode 2)

• lower the feed dog

•

the presser foot pressure must be

reduced

• use slide-on table

• attach the desired presser foot sole

to the BSR presser foot

• removing sole: press both buttons

(see arrows) on each side of the

foot

• slide the sole down the groove at

an angle

•

attaching the sole: slide the sole up

in the groove until it clicks into

place

Needle Stop Down (Default)

• the arrow points down on the

display = the sewing computer

stops with needle down, when

taking foot off foot control

Needle Stop Up

• press "Needlestop up/down" func-

tion. The arrow points up = the

sewing/embroidery computer stops

with the needle up on releasing

the foot control

Raise or Lower the Needle

•

by pressing the heel on the foot

control, the needle can be lowered

or raised

Securing With the Quick Reverse

Button (only Mode 1)

•

unplug the foot control

• place the fabric under the presser

foot, lower presser foot

•

hold upper and lower thread tight

and press Quick Reverse button to

start BSR mode

•

sew 5 to 6 securing stitches

• stop the BSR mode by pressing the

Quick Reverse button

•

cut threads

• re-start the BSR mode by pressing

the Quick Reverse button to conti-

nue the stitching process

Securing Function

(only Mode 2)

• press the «Securing

Function» button

• press the foot control or the Quick

Reverse button

• short securing stitch sequence will

be sewn as soon as the fabric is

moved under the presser foot.

After the sequence is sewn the set

stitch length will be activated and

the securing function will be auto-

matically deactivated

Free Hand Quilting Without BSR

Activation

•

touch the BSR button (on the left

side on the display)

• the BSR mode is deactivated, the

buttons «BSR1» and «BSR2» on

the left side on the display go off

• normal free hand quilting can

now be sewn with the BSR

foot, without automatic regu-

lar stitch length

•

attach the BSR presser foot to the

sewing computer and plug the

cable into the green socket until it

clicks into place

• the «BSR» screen opens automati-

cally

• the BSR mode 1 is activated (BSR1

is standard)

• the basic stitch length setting is

2mm

• set the desired stitch length

•

when sewing small forms and

stippling, stitch length of 1mm -

1.5mm is suggested

When exceeding a

certain speed, adhe-

ring to regular

stitch length cannot

be guaranteed.

Make sure that the

lens on the bottom

of the BSR foot is

not dirty (finger-

prints, etc.). Clean

lens periodically

with soft, slightly

damp cloth.

Using the following functions in the BSR mode:

032131.70.04_0509_a730_EN

1 2 ... 147 148 149 150 151 152 153 154 155 156 157 ... 284 285

Comments to this Manuals

No comments