Bernina 730 Instruction Manual Page 187

  • Download
  • Add to my manuals
  • Print
  • Page
    / 285
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 186
Sewing and Sewing Computer Support – Cleaning and Maintenance 185
Cleaning
If the sewing computer is stored in a cold room, it should be
brought to a warm room about 1 hour before use.
Cleaning and Maintenance
Cleaning the Stitch Plate Area
Periodically remove thread lint and
remnants which collect under the stitch
plate and the hook.
turn power switch to «0» (off) and
pull out plug from electric outlet
remove presser foot and needle
open the free arm cover
press the stitch plate down at
the back right corner
lift and remove stitch plate
clean the area with the lint brush
replace the stitch plate
Cleaning the Screen
wipe with a soft, damp cloth
Cleaning the Hook
turn power switch to «0» (off) and pull out plug from electric outlet
remove the bobbin case
clean the hook race using the brush provided or a cotton swab. The
use of any sharp instrument could damage the hook
insert the bobbin case
Cleaning the Sewing Computer
wipe with a soft, damp cloth
if very soiled, wipe with a solution of water and a few drops of
liquid soap on a damp (not wet) cloth
Lubricating
turn power switch to «0» (off) and pull out plug from electric outlet
squeeze 1 drop of oil into the hook race
run the sewing computer for a short time without thread to prevent
oil soiling your work
Important:
Never use alcohol or solvents of any
kind to clean the sewing computer!
Replacing the Sewing Light
Contrary to an ordinary bulb, the CFL sewing light has a better
illumination and a longer life.
Caution:
Please note that a defective CFL sewing light must ONLY be
replaced by an authorized technician. The sewing computer
must be brought to an authorized BERNINA dealer!
Refer to the safety
instructions!
!
Note:
BERNINA is committed
to the protection of the
environment. We strive
to minimize the envi-
ronmental impact of
our products by conti-
nuously improving
product design and
our technology of
manufacturing.
At end of life please
dispose of this product in
an environmentally
responsible way according
to the national directives.
Do not throw away this
product with your house-
hold waste. In case of
doubt, please contact your
dealer.
032131.70.04_0509_a730_EN
Page view 186
1 2 ... 182 183 184 185 186 187 188 189 190 191 192 ... 284 285

Comments to this Manuals

No comments