Bernina 730 Instruction Manual Page 16

  • Download
  • Add to my manuals
  • Print
  • Page
    / 285
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 15
14 The Sewing Computer – Operating Instructions
Threading the Upper Thread
Attaching the Thread Spool
raise the needle and presser foot
turn the power switch to «0» (off)
attach the foam pad
place spool on pin (thread winds clockwise)
attach the appropriate spool disc - diameter of
spool determines disc size. There must be no
clearance between the disc and the spool
take thread through rear guide A
then into slit of upper thread tension
Down
pull thread down to the right of the take-up
cover to B
Up
take thread up to the left of the cover to C in
the direction of the arrow, placing it in the take-
up lever
Down
take thread down and through guides D and E
Refer to the safety instructions!
!
Inserting the Bobbin
Clockwise Turning of
the Bobbin
the bobbin must turn
clockwise when the
thread is pulled
Inserting the Bobbin
insert the bobbin so
that the thread runs
clockwise
Pulling the Thread
Into the Slot
pull the thread
counter clockwise
into the slot
Pulling the Thread
Under the Spring
pull the thread to the
left under the spring
until it lies in the
T-shaped slit at the
end of the spring
A
C
D
E
B
032131.70.04_0509_a730_EN
Page view 15
1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 284 285

Comments to this Manuals

No comments