Bernina 730 Instruction Manual Page 169

  • Download
  • Add to my manuals
  • Print
  • Page
    / 285
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 168
167Setup Program
Opening Setup Program
press the external Setup button
menu appears
touch «Embroidery Settings»
the screen «Embroidery Settings 1» appears for adjusting the
embroidery hoop
«Adjust Reference Position» calibrates the needle to the center of
the embroidery hoop. Adjusting can only be activated if the
embroidery module and the oval embroidery hoop are attached.
It is only necessary to adjust the Reference Position once as the
same setting changes will apply to all the hoops.
insert the embroidery template into the hoop
touch «Check»
the hoop position is read and the needle positioned in the
middle (the needle should now be positioned exactly over the
center point of the template)
if it is not, adjust with the arrows
touch «OK»
the adjustment will be saved, the screen display closes and the
menu appears
touch «To Next Page»
the screen «Embroidery Settings 2» appears
Motor Speed
touching «+» or «» changes the basic settings of the speed by
10 stitches
the number in the bar reflects the stitches per minute
any change of the speed affects all 4 speeds (1/4 – 4/4), i.e.
slower or faster at all four levels
Auto Thread Cutter
when the bar is active (blue) the upper thread and bobbin
thread are automatically cut
when the bar is inactive (x) the Automatic Thread Cutter is off
touching the bar «Auto Thread Cutter» activates or deactivates
the function
Thread Tension Correction
touching «+» or «» changes the basic setting (0) of the upper
Thread Tension by plus or minus 20%
0 = basic settings (factory settings)
1 = + 10%
2 = + 20%
-1 = - 10%
-2 = - 20%
this correction fine tunes the basic tension setting on your
sewing computer, which may be affected by variables such as
thread weight, etc.
the number in the bar and the blue background of the «+» and
«» reflect the changes
the «Default» on-screen button returns you to the basic settings
the tension alteration affects all motifs and remains saved when
the embroidery computer is turned off («0»)
Embroidery Settings
Embroidery Settings 1
Embroidery Settings 2
032131.70.04_0509_a730_EN
Page view 168
1 2 ... 164 165 166 167 168 169 170 171 172 173 174 ... 284 285

Comments to this Manuals

No comments