Bernina 730 Instruction Manual download pdf (Page 153)

151Quilt Stitches – Applications

Beeper (Acoustic Signal) Deactivation/Activation

Beeper Deactivation/Activation

• touch the bar with the speaker symbol for BSR one time

• if the bar is blue, the sound for the beeper is active

• if the bar is gray and the speaker is red, the sound for the

beeper is inactive

With the Foot Control

1. With the Foot Control

• plug in the foot control

• lower the presser foot

• start the BSR mode by pressing the foot control

•

a red light appears on the presser foot

• the foot control must be pressed continuously

during sewing

• the speed of the sewing computer will be regu-

lated by the movement of the fabric

• by releasing the foot control the BSR mode will

be stopped

2. With the Quick Reverse Button

• remove the foot control

•

lower the presser foot

• start the BSR mode by pressing the Quick

Reverse button

• a red light appears on the presser foot

• the speed of the sewing computer will be regu-

lated by the movement of the fabric

• by re-pressing the Quick Reverse button the BSR

mode will be stopped

Deactivating the BSR Sewing Function:

Mode 1:

• if the fabric is not moved for approx. 7 seconds,

the BSR mode will be deactived and the red light

on the presser foot goes off

Mode 2:

• if the stitching process is ended by no longer

moving the fabric, one additional stitch is made

depending on the needle position. The sewing

computer always stops with the needle up, even

if the arrow on the display points down

Holding the Work

• hold and guide the taut fabric with both hands

• abrupt movements of the fabric (slowing down,

speeding up respectively) can result in slightly

too short or too long stiches

• continuous movement of the fabric (no abrupt

movements) under the foot will provide best

results

• move the fabric in one direction for best results

Application Example:

BSR With Zig-zag Stitch No. 2

• the zig-zag stitch can be used for thread pain-

ting or fabric embellishment for example

•

areas can be filled and forms or pictures created

BSR Function Deactivation

• pull out the plug of the BSR presser foot connec-

tion cable on the sewing computer. The pre-

viously selected stitch is active again

• remove the BSR foot

Activating the BSR Sewing Function:

032131.70.04_0509_a730_EN

1 2 ... 148 149 150 151 152 153 154 155 156 157 158 ... 284 285

Comments to this Manuals

No comments

Bernina 730 Instruction Manual Page 153

Comments to this Manuals

Related products and manuals for Sewing machines Bernina 730