Bernina 730 Instruction Manual download pdf (Page 46)

44 Practical Stitches – Applications

TIP

Edgestitching with seam guide

Eliminates tedious marking when sewing

parallel lines or grids.

TIP

Zipper foot No. 14 (optional accessory) can be

used for edgestitching when the guide on the foot

is adjusted as desired.

Wide Edgestitching

Needle Position

• any needle position can be used according to the

width of the stitching

• different needle positions will place the stitching at

various distances from the edge of the fabric

Presser Foot

•

Reverse pattern foot No. 1C

Guiding the Fabric

Presser foot as a guide:

 align the edge of the presser foot with the

finished or folded edge of the fabric

Stitch plate as a guide:

 guide the folded edge along the marks on the

stitch plate for stitching 3/8” to 1 1/8”

(1cm–2.5cm) from the edge

Seam guide as a guide:

 insert the seam guide into the hole on the back of

the presser foot shank

 adjust as desired, measuring from the needle

 tighten the screw

 guide the finished or folded edge of the fabric

along the seam guide

 to sew parallel wider lines, guide the seam guide

along a previously sewn line of stitches

Seam guide for slide-on table:

 insert into the groove (underside of table)

 position right of the presser foot in the desired

distance

 guide fabric along the seam guide

032131.70.04_0509_a730_EN

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 284 285

No comments

Bernina 730 Instruction Manual Page 46