Buttonholes
Securing the cord
• pull the cord through the buttonhole until
the loop disappears into the end of it
• pull the ends of the cord through to
wrong side of the fabric
• knot or secure with stitches
Hooking the cord onto presser foot
No. 3C, No. 3 (special accessory)
• insert the needle at the beginning of the
buttonhole
• raise the presser foot
• hook the cord over the center pin on the
front of the foot
• place both ends of the cord in the
grooves on the sole of the foot and pull
them to the back
• lower the presser foot
Sewing
• sew the buttonhole in the usual manner,
do not hold the cord tightly
• the buttonhole will form over the cord,
covering it
Cutting buttonholes open
• using the seam ripper, cut from the ends
towards the middle
• in order not to cut the ends of short
buttonholes by mistake, place a pin at
the end of the buttonhole for additional
security
Buttonhole cutter and block (special
accessory)
• place the fabric on the wood
• place the cutter in the center of the
buttonhole
• press down on the cutter with your hand
or a hammer
032907.52.04_0910_a430/a440/a450_EN
Comments to this Manuals