Bernina 430 Instruction Manual download pdf (Page 35)

35

Practical stitches - Application

Outer edges

• place edge of fold against the guide on

the Blindstitch foot

• select needle position at desired

distance from the folded edge

Edge stitching

Straight stitch No. 1

size and type suitable for the fabric selected

cotton, polyester or cordonnet (topstitching)

up

Blindstitch foot No. 5

430 / 440 QE: Reverse pattern foot No. 1

450: Reverse pattern foot No. 1C

Edge stitch foot No. 10 (optional accessory)

Stitch:

Needle:

Thread:

Feed dog:

Presser foot:

Needle position

• left for outer edge

• right for inner edge (hem edges)

Presser foot

• Blindstitch foot No. 5

Guiding the fabric

Presser foot as a guide:

• guide the folded edge along the edge of

the presser foot

Stitch plate as a guide:

• guide the folded edge along the marks

on the stitch plate (for stitching 3/8” to

1 1/8” (1 to 2.5cm) from the edge)

Needle position

• adjust the needle position to select

desired distance between rows of

topstitching or from fabric edge

Presser foot

• 430 / 440 QE: Reverse pattern foot No. 1

• 450: Reverse pattern foot

No. 1C

Narrow edgestitching

Wide edgestitching

Hem edges

• place edge of fold against the guide on

the Blindstitch foot (inside upper edge of

hem)

• select needle position right to sew along

the upper edge

Seam guide as a guiding aid:

• insert the seam guide into the hole on

the back of the presser foot shaft

• adjust as desired

• tighten the screw

• guide the folded edge along the seam

guide

• to sew parallel lines, guide the seam

guide along a previously sewn line of

stitches

Foot No. 5:

use any left or far right needle

position

Foot No. 10:

all needle position

C

Edgestitching with seam guide

• a big help when sewing parallel

lines, grids, etc.

032907.52.04_0910_a430/a440/a450_EN

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 85 86

Comments to this Manuals

No comments