Bernina 430 Instruction Manual download pdf (Page 21)

Stitch plate, feed-dog and fabric feed

Feed dog and fabric feed with height compensating tool

Feed dog and sewing corners

The feed dog works accurately when the

foot is level.

If the foot is at an angle, e.g. when sewing

over thick to thin or vice-versa, the feed

dog cannot grip and feed the fabric and the

fabric might jam.

Uneven layers

To solve this problem, place one, two or

three compensating plates as required

behind the needle under the presser foot

to level it.

Place one or more plates as close as

possible to the edge of the fabric on the

right side of the presser foot. This allows

for better feeding of the fabric when

sewing corners.

The space between the two rows of the

feed dog is relatively large due to the

width of the stitch plate hole.

To correct the height in front of the foot,

place one or more plates to the right of the

foot close to the needle. Sew until the foot

is level again and remove the plates.

032907.52.04_0910_a430/a440/a450_EN

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 85 86

No comments

Bernina 430 Instruction Manual Page 21