BSR foot - Application
1. With the foot control
• plug in the foot control
• lower the presser foot
• start the BSR mode by pressing
the foot control, the «BSR active»
symbol appears on the display
• a red light appears on the presser
foot
• the foot control must be pressed
continuously during sewing
• the speed of the sewing computer will
be regulated by the movement of the
fabric
• by releasing the foot control the BSR
mode will be stopped
Activating the BSR sewing function
2. With the Start-Stop button
• unplug the foot control
• lower the presser foot
• start the BSR mode by pressing the
Start-Stop button, the «BSR
active» symbol appears on the
display
• a red light appears on the presser
foot
• the speed of the sewing computer will
be regulated by the movement of the
fabric
• press the Start-/Stop button again or
actuate the presser foot lifter to stop the
BSR mode
Holding the work
• hold and guide the taut fabric with both
hands
• if the fabric is moved abruptly (sudden
stops or quick acceleration), some
stitches may turn out slightly shorter or
longer
• continuous movement of the fabric (no
abrupt movements) under the foot will
provide best results
• move the fabric in one direction for best
results
BSR-mode deactivation
• pull out the plug of the BSR presser foot
connection cable on the sewing compu-
ter
• remove the BSR presser foot
Using the Start-/Stop button to deacti-
vate the BSR function
In mode 1:
• if the fabric is not moved for about
7 seconds, the BSR mode deactivates
(display switches to BSR) and the red
light on the presser foot goes out
In mode 2:
• if the quilting is stopped by stopping to
move the fabric, an additional stitch will
be sewn depending on the needle
position. The sewing computer will
always stop with the needle up, even if
the arrow in the screen points down
032907.52.04_0910_a430/a440/a450_EN
Comments to this Manuals