Bernina 430 Instruction Manual Page 44

  • Download
  • Add to my manuals
  • Print
  • Page
    / 86
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 43
44
Decorative stitches - Application
Hand-look quilt stitch
430: Quilt stitch No. 49
440 QE: Quilt stitch No. 44, No. 60, No. 61
450: Quilt stitch No. 62
size and type suitable for the fabric selected
monofilament
30/2 cotton thread
up
430 / 440 QE: Reverse pattern foot No. 1
450: Reverse pattern foot No. 1C
Walking foot No. 50 (optional accessory for aurora 430 / 450)
Stitch:
Needle:
Upper thread:
Bobbin thread:
Feed dog:
Presser foot:
Freehand quilting
Straight stitch No. 1
size and type suitable for the fabric selected
monofilament or cotton
down
Darning foot No. 9, Quilting foot No. 24 (optional accessory)
Quilting foot No. 29 (optional accessory)
Stitch:
Needle:
Thread:
Feed dog:
Presser foot:
Hand-look quilt stitch
Suitable for all fabrics and work which
should look «hand sewn».
Sewing test
the bobbin thread is pulled to the right
side
1 stitch is visible (bobbin thread)
1 stitch is invisible (monofilament) =
hand-look effect
Upper thread tension
depending on the fabric = increase the
tension (6–9)
Balance
adjust stitch with the Balance if
necessary
Freehand quilting
for all freehand quilt work
Preparation
pin and baste top layer, batting, and
lining together
attach the slide-on table
Holding the work
hold the fabric with both hands like an
embroidery frame
start in the center and work out toward
the edges
Quilting a design
turn the work using smooth, round
movements to form the design of your
choice
Stipple quilting
technique covers the entire surface of
the fabric
the lines of stitching are rounded without
any sharp corners; they never cross nor
touch one another
Perfect corners
activate Pattern end and
Needle stop down and pivot
the work
when pivoting make sure that
the fabric does not become
distorted
Monofilament breaks
sew more slowly
reduce upper thread tension
slightly
032907.52.04_0910_a430/a440/a450_EN
Page view 43
1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 85 86

Comments to this Manuals

No comments