Bernina 430 Instruction Manual download pdf (Page 24)

24

Functions

Function buttons

Stitch width

• left button = narrows the stitch width

• right button = widens the stitch width

• keep button pressed = quick steps

• the basic setting of the selected stitch

blinks constantly

Stitch length

• left button = shortens the length

• right button = elongates the length

• keep button pressed = quick steps

• the basic setting of the selected stitch

blinks constantly

Needle position

• left button = needle to the left

• right button = needle to the right

• keep button pressed = quick steps

• total of 11 needle positions: 5 left,

5 right and 1 center

Pattern begin

• press the button

• the needle moves to the beginning of a

stitch or stitch program

Securing function (with 4 stitches)

• press the button before starting to sew =

individual stitches or stitch combination

will be secured at the beginning

• press the button during an individual

stitch = the stitch will be secured at the

end

• the sewing computer stops

• press the button during stitching a stitch

combination = the stitch combination will

be secured at the end

• the sewing computer stops

Balance / BSR

Balance

• press the button

• the balance symbol on the display is

active

• press the left arrow of the needle

position = subtracts space between

stitches

• press the right arrow of the needle

position = adds space between stitches

• press the button again = the balance is

turned off, the altered stitch returns to the

basic settings

• altered needle position settings remain

during the balance process

BSR

• with the attached BSR foot the BSR

function is switched on and off by

pressing the button

Needle up/down

In the basic setting the arrow points up.

• press the button briefly:

• the needle will go up or down (same as

tapping on the foot control)

• press the button longer:

• the needle will go down

• the arrow on the display points down

• the sewing computer stops with the

needle down

• press the button longer again:

• the needle will go up

• the arrow on the display points up

• the sewing computer stops with the

needle up

Mirror image (left/right)

• press the button

• mirror image of selected stitch will be

sewn

Slide speed control

• the motor speed can be freely adjusted

from minimum to maximum with the slide

control

• when winding the bobbin thread the

speed of the winder can be regulated,

when the sewing computer is not sewing

mem (Memory)

• press the -button

• «mem» will appear on the display

• the empty memory spaces (90) or (60)

and the cursor blink

• use the left arrow and the -button

to scroll and program stitches, letters and

numbers

«clr» (clear)

• press the button

• stitch length, stitch width, needle

positions are returned to basic settings

• active functions are deleted

Exception:

needle stop down

032907.52.04_0910_a430/a440/a450_EN

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 85 86

Comments to this Manuals

No comments