Bernina artista 200 Embroidery Instruction Manual Page 25

  • Download
  • Add to my manuals
  • Print
  • Page
    / 274
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 24
24 The Sewing Computer – Screen Display
Selecting Functions
touch the function of your choice
the selected function is highlighted in blue
(a number of different functions can be selected
simultaneously)
for more information on Functions see pages
29-33
•••••••••••••••••••••••••••••••••••••
Temporary Altered Stitch Memory
Stitch length, stitch width, needle position, etc. are
automatically saved. When the sewing computer is
turned off («0») or the «clr» (clear) button is
pressed, the changes are deleted.
Saving Altered Settings Permanently
The basic settings programmed by BERNINA can be
changed and stored in the SAA. They will stay
saved even after the sewing computer is turned off
(«0»). The basic settings are always visible.
Changing Settings (stitch width, stitch length,
needle position, thread tension, etc.)
select stitch for which you want to alter width,
length and/or needle position (e.g. zig-zag)
for more information see page 39
•••••••••••••
Altering the Needle Position
press the right or left Needle Position button
each press moves the needle one position to the
right or left
keep button pressed to quickly change needle
positions
the middle position of the bar is marked in black
the basic setting (bordered in gray) is always
visible
Presser Foot Indicator
the recommended presser foot for
the selected stitch is displayed by
number
by touching the Presser Foot symbol,
further possible presser feet for the
selected stitch will be displayed
if the presser foot is raised it is
indicated with an arrow
Restoring the Basic Settings
touch the external button «clr» (clear)
the basic setting of the selected stitch
will be restored
clear by pressing small number on
stitch width and stitch length bar
s007-34_e.qxd 19.4.2004 16:09 Uhr Seite 24
030794.71.04_0401_a200_EN
Page view 24
1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 273 274

Comments to this Manuals

No comments