102 Lettering – Applications
Note:
For accurate placement of the
lettering in equally spaced lines,
draw a guide line on the fabric.
For centered texts, sew it out first
to measure it, then draw the
guide lines.
Correcting Combinations
• «Saving Combinations» see page 154
••••••••
TIP
Adding Securing function (4 small
securing stitches)
TIP
after inserting specialty needle, activate
corresponding double needle in Security Program
• stitch width is automatically limited according to
the needle selected
• stitch width can also be limited manually when
using «normal» needles to reduce lettering size
accordingly
There are different ways to automatically secure
stitching:
1. touch function button before starting to sew
to secure stitching at the beginning
2. touch function button after completing the
stitching to secure it at the end
3. program function within a combination to
secure accordingly
Using specialty needles (e. g. double
needle)
Inserting Letters
•
a letter is always inserted above the cursor
• cursor must be scrolled up (arrow) to insert an additional
letter at the beginning of lettering
activate desired place by selecting required letter in Stitch
Altering Area or scroll to it
select new letter
•
letter is inserted above cursor
Deleting Letters
a letter is always deleted above the cursor
activate desired place by selecting required letter in Stitch
Altering Area, or scroll to it
touch «Delete»
• letter is deleted
Combination Sub-divider
•
Combination Sub-divider is used to stitch a text, e.g.
an address, in subsequent lines instead of in one
continuous line
insert «Combination Sub-divider» at the desired places
stitch, the sewing computer stops automatically at the
end of the first combination part
place fabric again
continue to stitch, the sewing computer stops
automatically at the end of the second combination
part
repeat as often as required
s097-108_e 19.4.2004 16:22 Uhr Seite 102
030794.71.04_0401_a200_EN
Comments to this Manuals