Bernina artista 200 Embroidery Instruction Manual Page 180

  • Download
  • Add to my manuals
  • Print
  • Page
    / 274
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 179
Sewing and Sewing Computer Support – Cleaning and Maintenance 179
Cleaning
If the sewing computer is stored in a cold room, it should be brought to a warm room about 1 hour
before use.
Cleaning and Maintenance
Cleaning the Stitch Plate Area
Periodically remove thread lint and remnants which collect under the
stitch plate and the hook.
turn power switch to «0» (off) and pull out plug from electric outlet
remove presser foot and needle
open the free arm cover
press the stitch plate down at the back right corner
lift and remove stitch plate
clean the area with the lint brush
replace the stitch plate
Cleaning the Screen
wipe with a soft, damp cloth
Cleaning the Hook
turn power switch to «0» (off) and pull out plug from electric outlet
remove the bobbin case
clean the hook race using the brush provided or a cotton swab. The
use of any sharp instrument could damage the hook
insert the bobbin case
Cleaning the Sewing Computer
wipe with a soft, damp cloth
if very soiled, wipe with a solution of water and a few drops of
liquid soap on a damp (not wet) cloth
Lubricating
turn power switch to «0» (off) and pull out plug from electric outlet
squeeze 1 drop of oil into the hook race
run the sewing computer for a short time without thread to prevent
oil soiling your work
Important:
Never use alcohol or solvents of any
kind to clean the sewing computer!
Replacing the Sewing Light
Contrary to an ordinary bulb, the CFL sewing light has a better
illumination and a longer life.
Caution:
Please note that a defective CFL sewing light must ONLY be
replaced by an authorized technician. The sewing computer
must be brought to an authorized BERNINA dealer!
Refer to the safety
instructions!
!
s171-182_e 19.4.2004 16:28 Uhr Seite 179
030794.71.04_0401_a200_EN
Page view 179
1 2 ... 175 176 177 178 179 180 181 182 183 184 185 ... 273 274

Comments to this Manuals

No comments