Bernina artista 200 Embroidery Instruction Manual Page 195

  • Download
  • Add to my manuals
  • Print
  • Page
    / 274
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 194
The Embroidery Computer – General Operating Instructions
Preparing the Embroidery Computer for Embroidery
193
Embroidery Presser Foot
No. 15
attach the Embroidery presser
foot No. 15
raise the presser foot so that
the embroidery hoop can be
attached
for more information on Needles see pages 17-19
•••••••••••
TIP
Spool pin
When using metallic or specialty threads, using the
vertical spool pin and the supplementary thread guide
(special accessory) may also help avoid problems.
General Operating
Instructions
Note:
While embroidering the bobbin can also be
wound, just like in sewing (see page 13).
Threading Upper and Bobbin Thread
for more information on Stitch Plates see page 17
•••••••••••••
Note:
Lower thread indicator sensor will only work when the bobbin
cover is closed, after inserting the embroidery bobbin case.
(Sensor has to be activated in the Setup Program.)
Threading the Bobbin Thread
for embroidery, thread the bobbin
thread through the pigtail tensioner
of the embroidery bobbin case
Threading the Upper Thread
attach foam pad and place the upper thread spool
when using Rayon or slippery embroidery threads, slip
the net over the upper thread spool
this prevents the upper thread from slipping and gives
an even thread feed
Straight Stitch Plate (optional accessory)
the straight stitch plate has a small needle hole. The needle insertion points (upper and lower thread
stitching) are limited, which produces a better embroidery result
remove the standard stitch plate and replace it with the straight stitch plate
Lower the Feed Dog
press the button on the right
side of the sewing computer to
lower the feed dog
Needles for Embroidery
raise the needle so that the
embroidery hoop can be
attached
s187-206_e 19.4.2004 16:30 Uhr Seite 193
030794.71.04_0401_a200_EN
Page view 194
1 2 ... 190 191 192 193 194 195 196 197 198 199 200 ... 273 274

Comments to this Manuals

No comments