Bernina artista 200 Embroidery Instruction Manual download pdf (Page 114)

113Buttonholes – Important Information

Thread Tension

• the tension is set automatically when a buttonhole is selected

•

the upper tension is slightly looser than normal

•

this gives a slightly rounded appearance to the beads, making the buttonhole more attractive

Balance for Buttonholes

Note:

With Direct Entry Length and Manual buttonholes each individual buttonhole sequence can

be balanced separately.

With the Stitch Counter buttonholes any Balance alteration affects both beads differently

(left and right): by adjusting the beads the keyhole or eye will be altered as well.

Balance for Direct Entry Length Keyhole or Round Buttonholes

• any Balance alterations affect both beads

• the keyhole or eye is balanced as follows:

 1. sew straight stitches until the sewing computer changes to the keyhole

or eye, then stop the sewing computer

 2. touch «Balance» and now adjust the picture in the right portion of the

Balance screen with the stitch length knob to suit the sewn buttonhole

• if keyhole is distorted to the right (picture A)

 turn stitch length knob counter clockwise

•

if keyhole is distorted to the left (picture B)

 turn stitch length knob clockwise

 3. touch «OK» and complete buttonhole

Balance for Stitch Counter Buttonhole

• any Balance alterations affect both beads differently:

•

if left bead is too dense (picture A)

 turn stitch length knob counter clockwise - left bead will be longer,

right bead will be shorter

• if left bead not dense enough (picture B)

 turn stitch length knob clockwise - left bead will be shorter, right bead

will be longer

 reprogram buttonhole after each Balance alteration

 after any Balance changes are made, reprogram the buttonhole

Balance for Manual Standard Buttonhole

• any Balance alterations affect both beads

Balance for Manual Round or Keyhole Buttonhole

• any Balance alterations affect both beads differently (see picture for stitch

counter buttonhole)

•

the keyhole or eye is balanced as follows:

• if keyhole is distorted to the left (picture B)

 turn stitch length knob counter clockwise

•

if keyhole is distorted to the right (picture A)

 turn stitch length knob clockwise

Recommendation

 sew a test on the fabric(s) you will use

Clear Balance

 touch «Reset» in the special Balance screen or press external «clr» button

(«clr» deletes the programmed buttonhole as well!)

Balance for Direct Entry Length Standard Buttonhole

• any Balance alterations affect both beads

s109-134_e 19.4.2004 16:24 Uhr Seite 113

030794.71.04_0401_a200_EN

1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 273 274

Comments to this Manuals

No comments

Bernina artista 200 Embroidery Instruction Manual Page 114

Comments to this Manuals

Related products and manuals for Sewing machines Bernina artista 200 Embroidery