Bernina Bernette 12 Instruction Manual download pdf (Page 52)

Sew over one strand of cording to create a

pretty swirled design on a jacket or vest or

sew over three strands of cording for border

trims. Pearl cotton, knitting yarn, embroidery

floss, lace thread, fine wool or lily yarn can be

used for cording.

Triple cording

Push the sewing thread to the left and insert

three cords into the grooves of the foot and

pull about 5cm (2 inches) of the cords behind

the foot.

Select the desired pattern and adjust the

stitch width so that the stitches are just

covering the cords. Lower the foot and sew

slowly guiding the cords.

Cording

Single cording

Mark the design on the fabric. Insert the

cord in the center groove of the cording foot

from the right side opening. Pull the cord

about 5cm (2 inches) behind the foot.

The grooves under the foot will hold the

length of the cord in place while the stitches

are being form over the cord.

Select the stitch and adjust the stitch width so

that the stitches are just covering the cord.

Lower the foot and sew slowly, guiding the

cord over the design.

* The accessory is optional. It is

not included with this machine.

cording foot

Basic Sewing Procedures

502020.75.28_021H2D0101_1010_IM_bernette 20 25_EN

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 79 80

No comments

Bernina Bernette 12 Instruction Manual Page 52