Bernina Bernette 12 Instruction Manual download pdf (Page 12)

8. After the bobbin has wound a few turns stop the machine

and cut the thread near the hole of the bobbin. Continue

filling the bobbin until it is full.

The motor stops automatically when the bobbin is full. Stop

the machine. Push the bobbin winder spindle to left.

9. Cut the thread and then remove the bobbin.

Note:

When the bobbin winder is placed on the right, "bobbin

winding position", the machine will not sew and the handwheel

will not turn. To start sewing, push the bobbin winder spindle to

the left "sewing position".

spindle

Note:

When the bobbin winder is pushed to the right, The

machine will display the symbol " "

spindle

6. Hold the thread tail securely in one hand.

7. Press on the foot control or the Start/Stop button to start

winding the bobbin.

Machine Setup

502020.75.28_021H2D0101_1010_IM_bernette 20 25_EN

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 79 80

No comments

Bernina Bernette 12 Instruction Manual Page 12