Bernina Bernette 12 Instruction Manual download pdf (Page 36)

Sewing corners

1. Stop the sewing machine when you reach

a corner.

2. Lower the needle into the fabric manually

or by pressing the needle up/ down button

once.

3. Raise the presser foot.

4. Use the needle as a pivot and turn the

fabric.

5. Lower the presser foot and resume

sewing.

Sewing on the heavy fabric

The black button on the left side of the

presser foot will lock the presser foot in a

horizontal position if you push it in before

lowering the presser foot. This ensures even

feeding at the beginning of a seam and

helps when sewing multiple layers of fabric

such as sewing over seams when hemming

jeans.

When you reach the point of an increased

thickness, lower the needle and raise the

presser foot. Press the toe of the foot and

push in the black button, then lower the foot

and continue sewing.

The black button releases automatically

after sewing few stitches.

You also can place another piece of fabric

with the same thickness at the back of the

seam. Or support the presser foot while

feeding by hand and sewing toward the

folded side.

Cardboard or

thick fabric

Basic Sewing Procedures

502020.75.28_021H2D0101_1010_IM_bernette 20 25_EN

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 79 80

No comments

Bernina Bernette 12 Instruction Manual Page 36