Bernina Bernette 12 Instruction Manual download pdf (Page 48)

- Baste the zipper opening on the garment.

- Press open the seam allowance. Place the

zipper face down on the seam allowance

with the teeth against the seam line. Baste

the zipper tape.

- Attach the zipper foot. Attach the right side

of the presser foot pin to the holder when

sewing the left side of the zipper.

- Attach the left side of the presser foot pin

to the presser foot holder when sewing the

right side of the zipper.

- Stitch left side of the zipper from top to

bottom.

- Stitch across the lower end and right side

of zipper. Remove the basting and press.

Inserting a centered zipper

Attention:

Zipper foot should be used for sewing width

center needle position straight stitch only. It is

possible that needle could hit the presser foot

and break when sewing other patterns.

5mm

1.5~3.0

Zipper Insertion

Basic Sewing Procedures

3.5

* The zipper accessory is optional. (For

model 20)

foot

502020.75.28_021H2D0101_1010_IM_bernette 20 25_EN

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 79 80

No comments

Bernina Bernette 12 Instruction Manual Page 48