Bernina Artista 640 Instruction Manual Page 11

  • Download
  • Add to my manuals
  • Print
  • Page
    / 168
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 10
11Operating Instructions
Inserting the Bobbin
Clockwise Turning of the Bobbin
The bobbin must turn clockwise.
Inserting the Bobbin
Insert the bobbin so that the thread winds
clockwise.
Pulling the Thread Under the Spring
Pull the thread to the left under the spring
until it lies in the T-shaped slit at the end of
the spring.
Threading the Upper Thread
Attaching the Thread Spool
raise the needle and presser foot
turn the power switch to «0» (off)
attach the foam pad
place spool on pin (thread winds clockwise)
attach the appropriate spool disc -
diameter of spool determines disc size.
There must be no clearance between the
disc and the spool
take thread through rear guide A
then into slit of upper thread tension
A
Down
pull thread down to the right of the take-
up cover to B
Up
take thread up to the left of the cover to C
in the direction of the arrow, placing it in
the take-up lever
Down
take thread down and through guides D
and E
!
Refer to the
safety instructions!
C
B
D
E
031508.50.04_0601_a640_EN
Page view 10
1 ... 10 11 12 ... 168

Comments to this Manuals

No comments