Bernina Bernette 92C User Manual download pdf (Page 28)

12/13/10

Temporary Altered Memory

Fabric: Firm woven fabric, 4” x 6” and

Lightweight tear-away stabilizer, 4” x 6”

Needle: 80/12 Universal

Thread: 30 wt. cotton embroidery

Needle Position: center

Presser Foot: Reverse Pattern Foot #1/1C/1D

Temporary Altered Memory: The last stitch alterations made to

each stitch will remain in effect until manually changed or until

the power to the machine is turned off or until CLR is touched.

Touch CLR to clear any previous stitch alterations.

Place the stabilizer behind the fabric.

Row 1

Select the Zigzag stitch. Align the left edge of the foot with the

left edge of the fabric. Sew about 1”-2” of the preprogrammed

Zigzag stitch.

Alter the stitch width and length to 5mm; continue sewing the

length of the fabric.

Row 2

Select the Running stitch. Begin a second row of stitching and

sew about 1”-2” of the preprogrammed Running stitch.

Alter the stitch width and length to 3mm; continue sewing the

length of the fabric.

Row 3

Select the Zigzag stitch again. Begin sewing a third row and sew

about halfway down the fabric. Notice that the stitch alterations

made to the Zigzag stitch remain in effect.

Select the Running stitch again. Continue sewing the third row

of stitching. Notice that the stitch alterations made to the Running

stitch also remain in effect.

Note: artista 730 and the 8 Series

machines also have a History function

that remembers the last 15 (730, 830)

or 12 (820) stitches sewn even after

the power is turned off or disconnected.

1 2 3

Do you know how to:

▪ Access any stitch?

▪ Make stitch alterations?

▪ Clear the Temporary Altered Memory?

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 64 65

No comments

Bernina Bernette 92C User Manual Page 28